+7(4722)42-11-79
Order a consultation
RU EN

KAELP-35 CABLE MOBILE ELECTRIC LABORATORY

Delivery time 60 days
Order consultation
appointment
Specifications
Equipment

GENERAL TECHNICAL DATA KAELP-35

Power supply - single-phase AC network with a frequency of 50 ± 2 Hz, voltage of 220 ± 20V                             

Consumption current, no more, A, - 60;            

KAELP-35 provides measurement of high DC voltage and AC voltage. Relative error of high voltage measurement - no more than 3%.

Length of the mains connecting cable on the drum - 50 m, cross-section - 8 mm 2 , 

cable type - КГ4х4.  

The length of the protective grounding wire on the drum is 50 m, the cross-section is 10 mm 2 , type - PML.

Length of high-voltage coaxial cable PVVEV on 3 drums - 30 m each, cross-section -3.5 mm 2 .

Length of high-voltage wire PVV-1 for testing with alternating voltage - 30 m

Occupied area in the plan, m - 1.8x3.0

Equipment weight, kg, no more - 500           

Service staff - 2 operators (at least)

Laboratory service life, years, - 10

 

HIGH-VOLTAGE TEST UNIT BVI-60/50-M5

The highest rectified voltage in continuous mode, kV: 60                                                                                                                                    

The highest operating current at rectified voltage, average value, mA, 50

The highest alternating voltage, effective value, kV: 50

The highest operating current at alternating voltage
(effective value), mA, 50

Dimensions, mm, 430х380х570

Weight, kg, no more than 85

 

 

BURNER UNIT BPR-25/8

Maximum output voltage in no-load mode, kV, 20

Minimum output voltage in no-load mode, kV, 1                                     

The number of burn steps. 6

Maximum current of the burning unit in short circuit mode, A, not less than 8             

Maximum voltage of afterburning in no-load mode, V, 500

Maximum afterburning current in short circuit mode, A, not less than 16            

Power consumption of the burning unit, kVA, no more than 18

Power supplied to the load, kVA, not less than 8.5        

Burning unit operation mode - long

Overall dimensions, mm, 430x620x500                                                                                       

Weight, kg, no more than 90

                                    

GAUV ACOUSTIC GENERATOR - 6-05

Drive capacity, μF: 13.5

Maximum output voltage, kV, 18

Maximum discharge pulse energy, J, 2200 

Operating modes:                           

- manual;     

- automatic with a pulse repetition rate of 0.4 Hz                                               

Overall dimensions, mm, 440x580x550

Weight, kg, no more than 60

 

                                                                                                                                                   

SOUND FREQUENCY GENERATOR GZCH-2500

Output power in matched mode, W, 2500

Maximum output voltage of no-load, V, 300                                                                  

Maximum output current, A 80

Generation frequency, Hz, 1024/2048

Frequency. modulation, Hz, 1.5-3                                                                                                          

Number of stages of matching with the load 12
Load resistance range, Ohm, 0.5- 100
Power supply - single-phase AC 220 ± 22V, 50 ± 2 Hz

Power consumption, not more, W, 3000

Overall dimensions, mm, 320х360х200

Weight, kg, 15                                                                                   

                                                    

RECEIVER P-806

Tuning frequencies, Hz 1024 ± 2 and 2048 ± 4

Ultimate sensitivity to magnetic field at ratio

signal / noise 6 dB, μA / m, no more than 50

The bandwidth in various modes of operation are given in table. 1.

 

                                                                                                               Table 1

Mode

Bandwidth at the level of -3 dB, Hz

Bandwidth at the level of -20 dB, Hz

1024 Hz

+ 1

12 +2

2048 Hz

10 + 2

14 +4

 

100-1200

-

       

Load - headphones with a resistance of 16-100 ohms.

Power source - 4 Ni-MH AA batteries with a voltage of 1.2 V and a capacity of 1.8 A ∙ h.

Rated supply voltage, V 5

Consumption current, mA, 30-130

Duration of work without recharging, hour, 15 - 50

The receiver has the ability to quickly monitor the battery charge level and the value of the input signal.

Overall dimensions and weight are given in table. 2.                                                                

                                                                                                                          table 2

Name

Overall dimensions, mm

Weight, kg, no more

Receiver P-806

180x100x66

0.6

Induction sensor P805-DI2

195x55x33

0,4

Acoustic sensor DAG-5

110x63x90

0.35

Sensor handle

 

Æ25х720 (in progress)

30x60x360 (during transportation)

0.3

Headphones 

220x180x80

0.3

 

REFLECTOMETER HIGH-VOLTAGE Oscillographic "ISKRA-3"

 

Measured distance to places of damage, m,…. from 5 to 12000

Indication type - digital and oscillographic with LCD display

Reflectometer power supply - 6V battery

Overall dimensions and weight are given in table. 3.                                                                  

                                                      

                                                                                                                                                      TABLE 3

Name and type of component

Overall dimensions, mm

Weight, kg

Qty.

Note

1. High-voltage reflectometer "ISKRA-3"

265x145x115

3

1

 

2. Pulse current sensor DIT-1

110x65x45

0.3

1

Installed at the output of the GAUV acoustics generator

3. Impulse voltage sensor DIN-1

600x80x90

1.1

1

Installed at the outlet of the
BVI-60/50-M5 unit

4. Low-voltage connecting cable

Length 1.5 m

0.2

1

 

   

 

 

HIGH-VOLTAGE TESTING APPARATUS AV-60-01.

Technical details

  • Output voltage of positive polarity, kV 5- 45
  • Output voltage of negative polarity, kV 5-45
  • Maximum capacity of the test object, microfarad - 1.5
  • The minimum capacity of the test object, microfarads - 0.1   
  • Time of continuous work, h - 1
  • Relative error of high voltage measurement,% - 3
  • Relative error of the test voltage frequency,% - 3
  • Weight, kg, no more - 100
  • Service life, years - 10

 

No.

                     Name

Qty.

    Note

1

Control stand included:

  • high-voltage switch for selecting modes - 3;
  • high-voltage switch "BURN-CHARGE GAUV" - 1; 
  • regulating autotransformer TDGC2-10 (RNO) - 1;
  • three-phase short-circuit breaker with electric drive - 1

1

 

2

Electrical laboratory control unit 

1

 

3

  OTDR high-voltage oscillographic
  "Iskra-3" complete with sensors

1

 

4

Sound frequency generator GZCH-2500

1

 

5

Receiver P-806 complete with sensors

1

 

6

High-voltage test unit BVI-60/50-M5

1

 

7

Burning unit BPR-25/8

1

 

8

Acoustics generator GAUV-6-05

1

 

9

Test apparatus AV-60-01

1

 

10

Drum unit with protective earth wire and mains cable

1

Length - 50 m

11

Block of three drums with cables for testing and insulation burning

1

Length - 50 m

12

High voltage wire for high voltage alternating test

1

 Length-30 m

(in the bay)

13

Siren SS-1

1

 

14

Signal lamp red

1

 

15

Fencing kit:

  • insulating pin - 4 pcs .;
  • insulating cord - 20 m

1

 

16

Insulating stand complete with base

4

 

17

KAELP-35 mobile cable electric laboratory. 

The passport. KAELP-35 /126.00.00.00PS

1

 

18

KAELP-35 mobile cable electric laboratory.
 Manual. KAELP-35 /126.00.00.00RE

1

 

19

Receiver P-806. Manual.

P806.00.00.00.RE

1

 

20

Sound frequency generator GZCH-2500.
Manual.

1

 

21

High-voltage oscillographic reflectometer
"Iskra-3" Operation manual.

1

 

22

Testing apparatus AV-60-01. Manual.

AV60-01-00.00RE

1

 

KAELP-35 mobile cable electric laboratory (hereinafter - "KAELP-35") is mounted in a van and is designed for:

  • testing the insulation of cables and other devices and devices with constant and alternating
     (50 Hz) high voltage;
  • burning of defective insulation of cables with its subsequent afterburning;
  • determination of the route of cable lines;
  • topographic determination of places of damage to cable lines by induction and acoustic methods;
  • determination of the distance to the place of damage of cables with a voltage of
    0.4-10 kV by a pulsed non-burn method at high and low voltage.

Terms of Use:  

  • ambient temperature range, о С - from minus 20 to +40;
  • relative humidity at 25  to C - 80%;
  • atmospheric pressure, mm. rt. Art. - 650 - 800

The place of operation must be free from vapors of aggressive liquids (acids and alkalis).

Operation of KAELP-35 in explosive environments is prohibited !

KAELP-35 is powered from an industrial single-phase network 220V, 50 Hz.

Power supply is allowed from an autonomous power supply generator with a capacity of at least 2.2 kVA or from a ~ 220V mains with an isolated neutral. 

 To fully realize the capabilities of KAELP-35, the generator power must be at least 25 kVA.